MGLT-55
MGLT-55--Mean Green Long Tack 55 Gallons
MEAN GREEN is a cost-effective, high-performance adhesive designed for a wide range of applications. Its unique formulation provides instant tack, strong bonds, and resistance to heat, cold, and moisture.
Features/Benefits
- Extended Open Time (4 to 8 min), provides a wider working window than standard adhesives
- Our most cost-effective non-flammable option. High resin load sits on top of porous fiberglass for a permanent bond with less product usage.
- Extremely low VOC formulation (approx 0.67 g/L) meets strict air quality standards while maintaining aggressive bond strength
- Replaces restricted MeCl solvents with a safer non-flammable alternative, ensuring compliance with EPA safety mandates through 2026
- Visual Quality Control (QC): The green color allows for instant visual confirmation of 100% coverage on the substrate, eliminating costly misses
- Zero Waste & Cleanliness: Ensures precise application with minimal overspray/misting, keeping the adhesive on the insulation and off the floor
- Viscosity Warning: Due to the thicker formula, you MUST use Tip SPR-AG-TIP to achieve a proper web pattern. Standard tips will not spray correctly
- Sold as Each
- For more info, SDS, or instructions, see https://vapcosolutions.com/
| Tack Time (Flash-Off): | 4 to 8 Minutes (Depending on Temp/Humidity) |
| Open Time (Working Window): | Up to 20 Minutes |
| Cure Time: | 10 to 40 Minutes (Handling Strength) / 24 Hours (Full Cure) |
| Temperature Range: | -20°F to 200°F (-29°C to 93°C) |
| Shelf Life: | 2 Years |
| Large Duct Runs: Spray entire 10+ foot sections without worrying about the leading edge drying out. |
| Complex Fittings: Great for radius bends and transitions that require repositioning. |
| Training Bench: Perfect for new installers learning the trade who need extra time to get the fit right. |
| PRO TIP: Watch Your Tip! Because MGLT is a high-viscosity (thicker) formula designed for affordability and hold, it requires a larger orifice to spray correctly. You MUST use Tip 730116 with your spray gun. Standard tips may cause the adhesive to stream rather than web. |
No downloads
No Cross Reference Available
No FAQs available
